Toyota triple-stick for dual cases.

[Patrolman]

Someone pointed this out on another forum. Pretty slick!

http://radesignsproducts.com/TripleSticks.aspx

[Haku]

Yeah....that dude put some real thought into the setup. Its a nice option to have instead of having to cut an additional hole for the second transfer case. Still not a fan of twin stick setup, but I almost considered this since its such an elegant solution. Here is his R and D thread....

http://www.pirate4x4.com/forum/showthread.php?t=916481&highlight=dual+case+triple

It started out as something a dude just did for his own truck and people saw it and begged him to sell it. Pretty cool. Oh, and just an FYI, you do have to make some modifications to the tranny tunnel to fit these, but its better then having to cut a whole new hole. Scotty (Addicted Offroad) has one of the prototypes in his rig if you want to check them out.

[Patrolman]

I have a Tuffy console that I plan on using, so there is little room for the back shifter, so this could be a solution. The price is a little steep, but something to consider. I could have done without the twin stick, but I don't think there is any way to do this without it.

[Haku]

I have a Tuffy console that I plan on using, so there is little room for the back shifter, so this could be a solution. The price is a little steep, but something to consider. I could have done without the twin stick, but I don't think there is any way to do this without it.

Yeah, getting the linkage right on it without the twin stick capability would be hard but not impossible. Could probably do it with a part in the middle that the linkage can pivot off though. Probably easier to just upgrade to that though. Definitely a good solution for keeping a center console.