Junkyard today...

[Sonomanclature]

They are out of a 77.5 F250, I don't have any interchange info just been looking for old fords in the yards.

[Hypoid]

I'll try and remember to get an interchange list. With that, you can search inventories on the interwebzzz.

[Hypoid]

Some pictures from today:

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/7-5-14_1.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/7-5-14_3.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/7-5-14_2.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/7-5-14_4.jpg

Best part on the truck...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/7-5-14_5.jpg

[Patrolman]

I was at Colorado Auto Parts the other day. They had a pair of Scout II's. Pretty rare to see them these days. One was pretty stripped, but the other was relatively complete. It even had what appeared to be a factory rollbar. Both had the bucket seat mounts, etc. They were both V8 engines, and I think both 304. The complete one even had an AC setup.

[94ToyBear]

Hey jeff I know where to find another scout ! Wink wink

[Sonomanclature]

If any one is out and happens across an 87-89 silverado/suburban/G-van with a 350 TBI, I am looking for the harness for the engine complete to ECU. I don't need the ECU yet but would like to get a head start on the harness. I can pay you in cash, or if you prefer beer and steaks (I work for a family owned butcher). My number is in the rescue list.

[Sonomanclature]

Spotted a near mint 80s Stepside bed at the Littleton Upull, I would have bought it but didnt have the funds, if any one is looking for one.
http://i171.photobucket.com/albums/u284/906sonoma/random%20shit/IMAG03761_zpsf77e5862.jpg

[Hypoid]

Sweet! Did you find your harness?

[The StRanger]

Sweet! Did you find your harness?

Not yt, but I realy need to do a boneyard run one of these weekends..
I got a long list !!

[Hypoid]

The ground was hard, not soggy, the temperature was comfortable. :)

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/001-3.jpg

Coming to a craigslist near you...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/003.jpg

[Adaa60]

How much is a trans?

[Hypoid]

The big two say $99.99. LKQ has a $30 core, U-PULL has a $20.25 core. Through tomorrow, LKQ has a 50% off sale, and a lot of ZJs.

[Serious Offroad]

Mike,
When are you going to find a HP Dana 60 front axle for me?

;)

[Hypoid]

You are on the list. :D

I did see a metric 60 under a super duty one time. Truck looked to have been in a hard rollover accident, the housing was pretty much stripped.

[Serious Offroad]

I've passed on a lot of those, won't match my rear axle bolt pattern.

[Hypoid]

I set out this weekend because LKQ had a 1/2-price sale. I never made it to LKQ because they did not have many candidates for my shopping list. My research provided a few scores, and a few oddities.

JKS disconnect link: Where is the other one, what did it come off of? Both questions went unanswered.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/2015-01-0301.jpg

This stock Xj hit something, and hit it hard....

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/2015-01-0302.jpg

Quest fulfilled!

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/2015-01-033.jpg

[Hypoid]

I ran through one of the yards I missed last weekend.

A little shivey love, I may have experience with one or a few of these...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/shivylove1.jpg http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/shivylove2.jpg

Binder love anyone???

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/binderlove.jpg

How about some Waggy love, matching D-44s, anyone???

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/waggylove1.jpg http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/waggylove2.jpg

[MultiScuf]

I would pull them but I dont have XJ anymore.

[Hypoid]

Just for Cliff!

There were two 5.9s: One, mostly untouched.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/cliff1.jpg http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/cliff2.jpg

The other, not so much...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/cliff3.jpg

[xaza]

Wow nice find Mike, thanks.

[Shane]

Went to the yard today with Sam to try and find the last few parts for the WJ. Was only able to get the headlamp wiring harness for each side. Sam was able to score a seat for his Ranger and a harness he has been lookin for. We also stumbled across some lost potential. Also a few at the other yard but forgot to take some pics.

[The StRanger]

Found my injector harness

[The StRanger]

And my seat recline asse, So I dont have to hold myself up by the steering wheel anymore !!!

[robotzombies]

Speaking of junkyards, I was thinking about going to U Pull in Denver this Saturday (March 14), assuming sunny weather and no snow/rain. Anyone else up for it? I'm trying to see if they might have any Explorer or Ranger parts (specifically any stock axles with 3.73 stock gears or better, driveshafts, and transfer case).

Just thought I'd see if anyone else wants to make a trip. I'd be willing to help pull some parts, and I have one seat in the B2 if anyone is in Denver and wants to share a ride.

[SubAlpine]

Not exactly at the yard, but on its way. I have been looking into getting a roof rack but I need the rails and crossbars. I had the holes to mount rails, but nothing else. cheapest I found was on ebay, $156. Or some after market ones starting at $277. Found a 3rd gen 4runner at Denver pull and pay, but it had been rolled, and the rack was TRASH. While I was there, some cool guy was pulling the locking diff, great find on his part. Anyways, I found a 3rd gen on craigslist that was totaled, and being parted before being sent to the yard. Long story short, I got a set of rails and cross bars in PERFECT condition for $50, plus a few other random pieces I needed. Hopefully will be picking up a roof cargo basket off of clist this week for $70. Been a good, cheap week for me.

[javaman34]

Just keep that flashlight out of you mouth, ya hear.

[SubAlpine]

I have been given about ten head lamps since then...

[javaman34]

Excellent. I have a few of those I use for stargazing.

[Rick]

I bet.....:lmao:

[Chris]

Also don't poke phone batteries with a knife.


http://youtu.be/7-xPHopebiE

[Jim]

Holy Roasted Marshmallows Batman!

[AccordRanger]

Ever see any super duties at any of the yards?

[Hypoid]

Ever see any super duties at any of the yards?It is always a crap shoot for condition and parts left on the truck, but yes, they do show up now and again. Your best bet is to keep an eye on the inventory, at the various web sites.

[Hypoid]

Last night I met with a guy to look at a car. He made it easy and met me at LKQ. After the test drive, I did a walk-through. Tonight, I had another XJ D-44 at the checkout.

Sometimes, it just happens that way...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/007.jpg

[Adaa60]

pretty!

[Hypoid]

Third one this year, incredible!

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/032915%2001.jpg

[The StRanger]

May not be Junkyard, but Will Shane and I at the steel shop still work ??

[Hypoid]

May not be Junkyard, but Will Shane and I at the steel shop still work ??You betcha! :thumb:

The primary motive behind this thread is to encourage people to get out and get their hands dirty. Learning from the unusual, and finding that hen's tooth/unicorn fart are just bonuses. :D

[robotzombies]

I went out to U Pull today and there was a 73 CJ5 out there. It looked like it was pretty picked through (the engine was still there, but it was sad looking). At least from when I was there, it has all of its axles from lugs to lugs, and a lot of the body was in good shape.

[The StRanger]

Think that was the same one Shane and I seen two or three weeks ago.

[Hypoid]

Epic day today!

Number four, this year:

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/003_1.jpg

Apparently, only the coolest kids have four headlights:

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/002_1.jpg

I also saw a J-10 with flat top knuckles, poor thing...
__________________

[94ToyBear]

I seen a d60 front from a dodge SRW at upullnpay
but it was the coupler type. It was around a 1996.

[Theteener]

Anyone know a spot to get stuff for newer JK's? I am going to possible take out the factory subwoofer and need to find a NON-subwoofer rear panel for a 2013. I Amazon'd a new 8" sub and if it doesn't sound good, I'll keep the 10's I have and build them into the storage drawer I'm going to make. I'd like to have the extra space though. The other issue I have is where to put a 2.5G air tank without eating up more space. Coming from a super duty to a jeep makes one reconsider storage and what stuff to take along to the hills.

[terminalchaos2]

Does anyone know a good place to find lots of XJ's with mostly intact engines?

[Hypoid]

Your first post is to this thread, I feel honored! :)

The simple answer is no. The more involved answer is knowing what years/models will have the part you want, and watch the inventory for those vehicles.

[Chris]

Your first post is to this thread

It also means you haven't posted the obligatory intro - http://www.frontrange4x4.com/forums/forumdisplay.php?58-Introductions ;)

[EKXJ87]

Apparently, only the coolest kids have four headlights:

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/002_1.jpg

Damn you Hypoid!!!!
I've been off the JY pipe :smokin: for several months now and can't stop thinking about this grill ever since yout posted it.
Thanks for the lead I finally broke down today. lol

[Hypoid]

GOOD JOB!!!!!!!!!!!! You saved me from myself. :D

Did you get the markers also?

[EKXJ87]

The passenger side was missing or I just didn't look around for it, but my plan was to use the ones I have but go figure they don't fit guess Ill be back tomorrow for the double tap.

[Hypoid]

my plan was to use the ones I have but go figure they don't fitI have heard that before. Last I saw of the passenger marker, it was on the same side fender well, in the engine compartment. It looked like somebody wanted the lamp from that socket. :smokin:

That is not the only Waggy in that yard. If you still can't find a passenger marker, let me know! I am always scouting '87 to '90 XJs...

[The StRanger]

Hit the boneyard on Fax & Tower.. Found my old school Bronco.
Jr found a very rare Explorer Limited grill... Its his now..
Seen an "Very clean" lightly modified Scout in the parking lot..

[The StRanger]

Jr also found the steering like for The Crypt and I scored some Warn lockout hubs !

[javaman34]

I didn't know there was one out there. How much was left of the Bronco?

[The StRanger]

It was 80% clean.
Some interior gone but still had the captains seats ..

[javaman34]

Wish I had time to get down there and start pulling stuff.

[The StRanger]

If I had more time I would have pulled the serp belt system..

[javaman34]

Man, I could use that too. What size engine did it have?

[The StRanger]

5.8, 5 speed w/ manual shift t case..

[javaman34]

Oh man. Oh well, I can try Saturday and see if there are any parts left.

[jayson44]

anyone going junking soon? I need an antenna for my TJ. mine ripped off at some point and tore the base in half. so I'd need the whole antenna/base/wire. shouldn't be hard to find as long as you can find a TJ sitting around.

J.

[94ToyBear]

Two Dana 60s from 96 dodge V10 pick ups at pull n pay on Broadway, unfortunately they are ball joint and cupping type butll still!
Also an 85 4runner. Been picked of the good stuff but still a lot there

[96EXXLTinCO]

I've had this little growl going on in the LF for a little while now. Ran to the pull and save today to grab a hub/bearing, and ended up with my best day of parts finds so far. Didn't take long to find a hub/bearing that looked like it hadn't been on the truck all that long. $15. Came across one with really new looking Bilsteins on the front, and slightly older looking ones on the back, didn't have the right tools to get em off, but coulda had a fairly new set for $10. I did end up finding a set with mounts on one end that I think will work for fab'n up some front sway bar disco's, and for $10 for the pair, I'll give em a tryout. I knew it would happen someday, and today was finally the day.......... Found a bug shield with zero cracks. Not a color I want, but that's what paint is for. took a peek in another EX in that row, and found it to have an almost brand new weatherstrip around the passenger door. open all the other doors and they were all new. Only one I didn't take is the one for the back hatch glass, it had a cut in it. got the other 5 though for total of $28. The drivers' side seat belt latch quit working some time ago, and I grab a newer set up out of a 97 or 98 I think, bolted right in and the newer style looks much better, so I grabbed on for the passenger side today as well, $19, I can get the whole thing at another yard up North for $6, but I hate to drive an hour for a seatbelt, so pulled the trigger and the fronts will finally be matching soon. Found a factory hitch/bumper combo on a 2002 that got me to thinking........took some measurements and I think this thing will fit. I only took the steel inner piece with the hitch and plates to mount it, along with the 7-pole round electrical/lighting socket, going to use it as a foundation to build on $25. Came across one with a conical spectre oiled air filter. Not the best brand out there, but for $3, It'll work for now. Final find of the day was a used set of these:


Amazon link to item (http://www.amazon.com/111039-Explorer-Crystal-Headlight-Assembly/dp/B0015PRVF6/ref=sr_1_4?ie=UTF8&qid=1443077902&sr=8-4&keywords=96+explorer+headlights)


They need to be wetsanded and polished up again, but at $52, I'm not complaining about a little sanding. Only found 1 set of F-150 leafs and they were rustier than I wanted to mess with. All in all what I call a victory at the yard today. And now I have lots of work ahead of me. Still looking for that elusive set of springs and t-case.

[94ToyBear]

Chad were you at pull n pay in denver around 11?

[96EXXLTinCO]

Yes I was. Leila was with me along with another buddy of mine. Were you there too?

[EKXJ87]

Thats quite the score of parts :thumb: Ive learned that packing a lite tool bag for walking the JY and keeping the full arsenal to tools in the truck is a must just incase I come across that "unicorn" part.


Found a factory hitch/bumper combo on a 2002 that got me to thinking........took some measurements and I think this thing will fit.
Just to be sure I like to remove the parts and then go find my yr of vehicle and do a test fit ? but XJ are a dime a dozen also.

[94ToyBear]

Yes I was. Leila was with me along with another buddy of mine. Were you there too?

Yeah I was, I was with on older guy a young guy 18 and a girl. I think I seen you, see someone with a bug shield in a flat top dolly around 11 to 11:45 on the north side of the yard. Small world bet it was you.

[96EXXLTinCO]

Thats quite the score of parts Ive learned that packing a lite tool bag for walking the JY and keeping the full arsenal to tools in the truck is a must just incase I come across that "unicorn" part.
That's what I did, took just the tools I needed to get to the hub/bearing but I didn't make it too far before I was going back out to get rest of the tools. I had help, tons of explorers to go through, and I took advantage of both.

Just to be sure I like to remove the parts and then go find my yr of vehicle and do a test fit ? but XJ are a dime a dozen also.
That did cross my mind, but in the end, I decided if it doesn't fit how I like/want, then if nothing else, I have good solid hitch to integrate into a custom build down the road. The width on it looks damn close, so I think at the worst I may need to modify the ends of my frame a bit, maybe drill some holes. But being a fabricator, possibilities are wide open.




Yeah I was, I was with on older guy a young guy 18 and a girl. I think I seen you, see someone with a bug shield in a flat top dolly around 11 to 11:45 on the north side of the yard. Small world bet it was you.

That was me alright. I dont remember seeing your group, but I pay so much attention to the cars that I don't notice too many other people in the yard, always afraid of missing something good if I dont pay attention. I was there for quite some time after that as well. That dolly was heaped with parts by the time we left yesterday afternoon. Did you find what you were looking for?

[94ToyBear]

Haha small world. Yup we went for about 40 lug nuts to replace some on our shop cars, s10 pick up and blazer.
Front end parts from 90's Dokota found a front bumper only, then I stumbled on a 1998 YJ.......(labeled wrong) was more like an 87 to 89. Found my tie rod and ends and the shaft from the steering wheel to box.
Oh and found the only side mirror from a s10 in the yard that was still intact.


Was a good day, all together my group save around 1000 bucks.

[96EXXLTinCO]

I have no clue what i saved. Spent more than i intended, but definitely found a couple gems. Biggest had to be the new door seals all the way around on one of the explorers. The hatch glass seal had a tear so i left it, but i got almost brand new seals for all 5 doors. Thats why i love the JY. Never k ow what you might find!!

[94ToyBear]

Going back today to snag the tail pipe ! And to take some time and look things around.

[Hypoid]

Poor lil' guy, not much that usable on this one.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1339.jpg

Had a busy day Sunday: Junkyard for alignment shims, to Aurora where my bud had his Jeep apart, home to shower for the Yankee Hill run.

[AccordRanger]

Does anyone see any sidekicks or trackers often?

[Hypoid]

Your best bet is to check the inventory list on the web sites.

[94ToyBear]

Does anyone see any sidekicks or trackers often?

Been seeing a few every Time I go to pull n pay Denver.

[Hypoid]

A couple NAXJA guys got together for a junkyard run. I did not find any hen's teeth, but one of the guys did score the elusive KXZJ 8.25" axle to replace his D-35.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/103115%2004.jpg

The hardest part is finding a decent newer Cherokee, and an unmolested Liberty, to assemble all the parts for this hybrid.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/103115%2003.jpg

There was some fun stuff.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/103115%2002.jpg

1950 Caddy, I keep thinking about the spot/search light mounted to the driver's door. Adam needs that for his rat rod. :D
http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/103115%2001.jpg

[94ToyBear]

Fyi there was a Mark 5 with a 9 inch rear diff with stock disk breaks!! Seen it last week.

[Adaa60]

Found this at LKQ on fed yesterday looking for jeep parts!
http://i1278.photobucket.com/albums/y518/Adaaoffroad/Mobile%20Uploads/20151121_120139_zpsdlecnne3.jpg (http://s1278.photobucket.com/user/Adaaoffroad/media/Mobile%20Uploads/20151121_120139_zpsdlecnne3.jpg.html)
http://i1278.photobucket.com/albums/y518/Adaaoffroad/Mobile%20Uploads/20151121_120215_zpsokjcxxhg.jpg (http://s1278.photobucket.com/user/Adaaoffroad/media/Mobile%20Uploads/20151121_120215_zpsokjcxxhg.jpg.html)

http://i1278.photobucket.com/albums/y518/Adaaoffroad/Mobile%20Uploads/20151121_120200_zps6riqqihe.jpg (http://s1278.photobucket.com/user/Adaaoffroad/media/Mobile%20Uploads/20151121_120200_zps6riqqihe.jpg.html)
http://i1278.photobucket.com/albums/y518/Adaaoffroad/Mobile%20Uploads/20151121_120149_zpssm2lsver.jpg (http://s1278.photobucket.com/user/Adaaoffroad/media/Mobile%20Uploads/20151121_120149_zpssm2lsver.jpg.html)

[96EXXLTinCO]

Headed out to the junk yard today to poke around a bit. Found me a little gem.

http://i1378.photobucket.com/albums/ah95/isplaytime/11-22-15%20BW1354%20score/20151122_174052%20Large_zpsdk2ipf6q.jpg

http://i1378.photobucket.com/albums/ah95/isplaytime/11-22-15%20BW1354%20score/20151122_205140%20Large_zpsjhrcklwu.jpg

http://i1378.photobucket.com/albums/ah95/isplaytime/11-22-15%20BW1354%20score/20151122_205149%20Large_zpspmpvpjle.jpg

Everything I need to finally get rid of the electronic shift t-case, INCLUDING the uber hard to find trim ring for a manual trans and transfer case. Going back tomorrow for a couple other goodies that caught my eye today.

[The StRanger]

Thats what ya need

[Hypoid]

This might hurt..

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1421.jpg

A lot!

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1422.jpg

I should have taken the seat bottom out.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1423.jpg

Made it home anyway!

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1430.jpg

[The StRanger]

Nice.

[EKXJ87]

A gem indeed! Tell me you had help getting that in the XJ?

[Hypoid]

Tell me you had help getting that in the XJ?Oh yes, I did! :D

[dieseldoc]

Nice find.

[Hypoid]

I have not been to the yards much this year. I did a run-through on the 4th of July weekend. All of these vehicles are long gone.

An old Fairlane.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1456.jpg

A chopped up XJ with an MJ tailgate welded on the back.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1457.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1459.jpg

Another old Cherokee with the offset D-44 under the back.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1460.jpg

The "Cyclops" hood vent. http://www.naxja.org/forum/images/smilies/biggrin.gif

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1462.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1463.jpg

[Hypoid]

I went for another run on Saturday. I counted six, two door XJs. One was the '97+ body style. I saw a 3/4-ton Chevy with flat top knuckles, not sure I want to deal with those. There was a '90 in the new sets with some Swampers and a lift. A couple young guys were pulling the lift, we had a good visit. http://www.naxja.org/forum/images/smilies/smile.gif

Coolest car of the weekend, a 1950 Studebaker Commander.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1566.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1573.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1572.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1568.jpg

Flatheads forever!!!!! http://www.naxja.org/forum/images/smilies/biggrin.gif

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1567.jpg

[Patrolman]

Cool Stude. Lots of good trim parts on that car! I am sure there is a collector somewhere that would drool over the parts.

[94ToyBear]

I was there the other day too, took a while looking at the stud, rat rod part are all-around this thing
Just no time or money for any of it

[dieseldoc]

I have to start cursing the yards....I need a rear 60

[94ToyBear]

83 jeep cj i belive in pull n pay denver
Some body parts, tranny motor and front axle still there.
Pm me if you need a pics textes to you.

[Hypoid]

There will be a frenzy when they bring this out from the drain shop...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1608.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1610.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1609.jpg

I asked why the truck was there. One of the guys thought it has a bad head gasket.

[Fordguy77]

If it even hits the lot before being parted. Unless managment has changed. a lot of good stuff like this, never actually makes it whole.

[dieseldoc]

That won't make it out with out being stripped first.

[Cr33p3r]

I see a lot of parts off that f350 I need

[Hypoid]

WHAT DID YOU DO?????????????? :D

[dieseldoc]

I see a super 60 that needs a new home

[redneck23ms]

350's just had a normal 60.

[Hypoid]

I see a lot of parts off that f350 I need
Somebody got the hub locks.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1667.jpg

Oops! Wrong truck. Now there are two of these axles sitting in the yard.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1669.jpg

[Hypoid]

Two wheel drive, has some newer replacement parts.

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1671.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1673.jpg

Cherokee bucket seats. :tisktisk:

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1672.jpg

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1674.jpg

Coming soon...

http://i232.photobucket.com/albums/ee120/Hypoid/Parts%20Dog/HPIM1675.jpg

[dieseldoc]

Keep your,eyes open, My friend needs a 70's Ford high pinion d44

[Cr33p3r]

WHAT DID YOU DO?????????????? :D

I haven't done anything but you know how my mind comes up with ideas.

[dieseldoc]

Never hurts to have the axles innovation laying around for some project that just needs a new set.

[Hypoid]

Keep your,eyes open, My friend needs a 70's Ford high pinion d44
If you want a heads-up, I need a phone number where I can send pictures. If you prefer a coil or leaf sprung, I need to know that also.

[Hypoid]

I haven't done anything but you know how my mind comes up with ideas.Looking at these chunks, all I can think is they will lower the COG on your Bronco! :lmao: