King of The Hammers Buggy Build!!!!

[mattzj98]

This will most likely be my last build on FR but I figured Ill share it and keep track of updates on here!

we took a YJ frame, extended couple feet front and back for some great wheelbase for the go fast stuff! Took it out to oklahoma for one of our sponsors to source a block and front and rear axles.

The rig was supposed to run 2014 KOH but due to legal issues we didn't get our hands on it again until about a couple weeks ago and have been going at every day since!

Front and Rear is now 4 linked, we tried to get away with not running a trackbar up front, but it is near impossible since our class spec doesnt allow to run full hydro. while its doable with enough triangulation, the bump steer at high speeds through deserts would just be too scary, and not something we want to deal with.

Heading out east to pick up the chasis and parts!!
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/p600x600/10014679_1433946716843227_442642645_n.jpg

parts getting loaded onto my tow rig. A lot heavier than it looks, 2 pallets worth!
https://scontent-a-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/1958039_1434527230118509_2025835771_n.jpg

The shop we picked it up from was in Arkansas Missouri Oklahoma corner, on our way back we stopped by 4wheel parts in Tulsa to pick up a brand new set of awesome tires and get our trailer tires inflated some more
https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn1/t1.0-9/p600x600/1970545_1434527480118484_549583582_n.jpg

Here's some of the goodies!

https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn2/t1.0-9/p600x600/1899986_1434527773451788_1395765425_n.jpg
https://scontent-b-dfw.xx.fbcdn.net/hphotos-frc1/t1.0-9/p600x600/999943_1434527793451786_59908710_n.jpg
https://scontent-a-dfw.xx.fbcdn.net/hphotos-prn2/t1.0-9/p600x600/1511667_1434527913451774_581560532_n.jpg
https://scontent-b-dfw.xx.fbcdn.net/hphotos-frc3/t1.0-9/p600x600/1932234_1434527743451791_51279838_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/p600x600/1978801_1434527726785126_325723835_n.jpg
https://scontent-a-dfw.xx.fbcdn.net/hphotos-frc3/t1.0-9/p600x600/971941_1434527550118477_462961534_n.jpg
https://scontent-b-dfw.xx.fbcdn.net/hphotos-frc1/t1.0-9/p600x600/1939465_1434527820118450_1250634356_n.jpg

[mattzj98]

from this point on, the build has started!

we made a custom dashboard to fit digital gauges and lawrance navigation unit
this is new vs old

https://scontent-a-dfw.xx.fbcdn.net/hphotos-frc1/t1.0-9/p600x600/1960100_1434527943451771_622711350_n.jpg

we are doing custom carbon fiber wrap on it.. should add another 500 hp to our LS v8
https://scontent-b-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/999954_1434528083451757_1814151373_n.jpg
https://scontent-a-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/1897985_1434528113451754_1857711862_n.jpg
https://scontent-a-dfw.xx.fbcdn.net/hphotos-frc1/t1.0-9/p600x600/1979474_1434528203451745_1400179349_n.jpg

next thing was to finish burning in the cage and give it a coat of paint to not have to struggle with rust and crap. Tractor did great for that purpose!

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/p600x600/1800312_1434527976785101_308790359_n.jpg
Also welded on and threw some paint of fuel cell holder! rotopax fuel / water cans will be mounted to each side of the fuel cell bracket
https://scontent-a-dfw.xx.fbcdn.net/hphotos-prn2/t1.0-9/p600x600/1069952_1434528016785097_1975490293_n.jpg

[mattzj98]

Started setting up fuel cell, cage went in.

https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn2/l/t1.0-9/p600x600/10003534_1434528033451762_1943067039_n.jpg
https://scontent-a-dfw.xx.fbcdn.net/hphotos-prn1/t1.0-9/p600x600/10012435_1434528173451748_1455848471_n.jpg

Mounted coilovers and finished everything up in the rear end, mounted beadlocks and the back end is near complete
https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn1/t1.0-9/p600x600/1014026_1436528469918385_2097046745_n.jpg


onto front end....

[Patrolman]

Wow, lots of work! Looks good!

[Jim]

So the KOH bug has hit hard! Fun project - thx for posting it!

[mattzj98]

More coming!
Thanks Jeff and Jim.

Jeff, I have those light covers for ya

[xaza]

last build on FR? Sweet start.

[glacierpaul]

Sick!! As always Matt, nice job!!

[tonkatoy]

looking good

[mattzj98]

Thanks guys

BILL!! I will need those driveshafts made just as we talked, sorry it took so long, like ive mentioned, we just got the rig back!!

also, would it be cheaper to lengthen one of the driveshafts we have for my zj, or replace yoke on the one you built me last year?

[Heather]

Looks like it started out as Kermit...Looks like a fun process!

[mattzj98]

Heather, it did! although now, the only part left of Kermit is the little piece of metal between fire wall and cab

[mattzj98]

Well.. we got the beast FIRED UP!!! man, that LS1 roars!!!!!

I personally hooked up the NP201 Doubler from NorthWestFabWorks along with their cable shifter. Apparently it was not meant to work with a Ford style NP201 and Chvey's 700r tranny.. but we made it work!

The tranny shifter also in place! pics coming up! If all goes well, next weekend we get to test drive that sucker!

[mattzj98]

some front end work!

this is before coils (not at ride height) and before track bar
https://scontent-a-dfw.xx.fbcdn.net/hphotos-ash3/l/t1.0-9/p600x600/1908230_1434514710119761_1864253587_n.jpg

gotta love PSC
https://scontent-a-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/1898002_1434528146785084_1463890482_n.jpg

[mattzj98]

Alright I got some pics!

alternator in, water pump in, tensioner set.. 3 belts later we got the right size!
https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn2/t1.0-9/p600x600/10013559_1438560433048522_1908193017_n.jpg

working away at the cable shifter kit!
https://scontent-b-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/10155291_1438559299715302_1639513942_n.jpg
https://scontent-b-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/10172619_1438559279715304_1751819997_n.jpg
https://scontent-b-dfw.xx.fbcdn.net/hphotos-prn2/t1.0-9/p600x600/1458447_1438559313048634_796372893_n.jpg
https://scontent-b-dfw.xx.fbcdn.net/hphotos-frc3/t1.0-9/p600x600/1002649_1438559333048632_271380321_n.jpg
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-prn2/t1.0-9/p600x600/10150610_1438559269715305_1016624111_n.jpg
Beadlocks mounted.. 6 rims and tires, 32 bolts a piece and roughly 5 times each.. holy workout!
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-frc1/t1.0-9/p600x600/10015172_1438559086381990_1616747069_n.jpg


Time to cool this thing down!
https://scontent-a-dfw.xx.fbcdn.net/hphotos-ash3/t1.0-9/p600x600/1601543_1438559103048655_937904283_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-ash3/t1.0-9/p600x600/10153738_1438559123048653_169204946_n.jpg

[carpenle]

Wow is all I have to say! So why is this your last build?

[mattzj98]

A lot of time goes into documenting a build, after having done a KOH buggy, what else might one do? There also isn't a whole lot of interest I. Builds vs other stuff so few things considered this will most likely be last one here

[Brad]

Very nice work Matt! Keep the pics coming!

[mattzj98]

Driveshaft measurements dropped off at Bills, can't wait to get them back!

[Cr33p3r]

Nice Matt, how did that shifter turn out?

[mattzj98]

the only thing that needs to be done at this point to actually drive is get a throttle cable, install gas pedal and front brake lines

we got roof tabs in, seats and harnesses installed, ram assists is in and hooked up correctly, tranny cooller lines, fan, all the switch panels.. should be ready for lights and navi soon here!

the shifter is nice, needs some adjusting, will be doing that once its actually bolted down to the floor... oh yeah, gotta weld in a floor haha

[mattzj98]

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xpa1/v/t1.0-9/10155423_276777332489337_4052541621046258030_n.jpg ?oh=1d87d4e3d6661319ec520016301545df&oe=54E9440F&__gda__=1424307639_200e701f506c9104c33d787a44f9f8e d
https://scontent-b-sjc.xx.fbcdn.net/hphotos-xfp1/v/t1.0-9/p843x403/10274093_276485295851874_5438820428297071557_n.jpg ?oh=dd3cfbf067b558849780688dbaf160d9&oe=54EB7445

[Fatboris]

Very cool!

[Jim]

Nice. You driving?

Ranked/Timed race? If so, how'd things turn out?

Break anything / want to upgrade anything?

Tons of Q's on my mind (but no, I'm not itching to build one).

[Patrolman]

Nice to see all the effort paid off!

[mattzj98]

Broke transmission, front diff cover exploded. Dont use aluminum diff cover on a race rig, not worth it

[Jim]

busted trans - no backstory needed, but an exploded front diff cover?!?! How did that happen? Hit something from the outside or did the insides want "out" in some catastrophic manner?

[Mr6dwg]

The shop we picked it up from was in Arkansas Missouri Oklahoma corner, on our way back we stopped by 4wheel parts in Tulsa to pick up a brand new set of awesome tires and get our trailer tires inflated some more

I grew up in Pineville, which is fairly close to where you are talking about. There is all flavors of ingenuity there, from Redneck to Pro.