In Cab Winch Control

[Brody]

here is a link to a write up of how to install a basic in cab winch control;

http:4x4wire.com/tech/winch/remote/

[Brody]

Thanks to Swath for this :

[Brody]

Here is another one, this one using 12 Volt Guys switch and plate:

http://www.stu-offroad.com/recovery/incab/incab-1.htm

[Brody]

And another..this showing your very basic 3 wire, 3 position switch diagram for the remote. This one is the best I think, as it is the most simple of all of the remotes. Like I said, this is the one I used for mine and I used a cut off chunk of regular 3 wire extension cord for the wire:

http://www.fullsizebronco.com/forum/showthread.php?t=57813

[Brody]

Here are four more:

Links:
http://www.4x4wire.com/tech/winch/remote

http://www.4x4wire.com/jeep/tech/winch/hardwire

http://classicbroncos.com/winch_remote.shtml

http://jeepinwv.com/forum/viewtopic.php?f=16&t=7887&st=0&sk=t&sd=a&sid=e264e06bd5fe25072ea954c7a8648021&start=0
http://www.frontrange4x4.com/forums/images/misc/progress.gif

[Brody]

And some information on making and/or adapting your winch for a wireless remote:

http://www.pirate4x4.com/forum/showthread.php?t=606626

And a cheap Pep Boys winch remote:

http://www.pirate4x4.com/forum/showthread.php?t=434762

And this one from Charlie. It isn't a build it yourself, but for under $50 not a bad deal:

http://www.northernautoparts.com/ProductModelDetail.cfm?ProductModelId=18169

[Brody]

Here is the schematic for a Warn Winch in cab winch control:

[Brody]

And another showing an in cab M8000 in cab winch control into a 4Runner:

http://yotatech.com/f131/cab-control-warn-m8000-winch-151571/

[Brody]

Warn 9.5 in cab wiring diagram with master arm switch install: