What tires can I fit

[Luke]

So I'm looking to get new tires in the next month or two, and I want to know how big I can go. I am currently running 235/75/15. I have an 87 Hardbody with a 3 inch BL, and have about 5 inches between tire and top of fender, and 3.5 inches between tire and sides where it could possibly rub. Any input is welcome!

[The StRanger]

Almost all tire stores will try bigger tires for clearance..
As long as you get your tires from them.

[Brady]

I'm a survive coordinator at a local tire shop and you may have some rubbing but as long as your not afraid to do some trimming if you have to, you should be fine.

[gm4x4lover]

31x10.50x15 was a factory size. With a 3" lift you should be able to run a 33 of some sort. It also depends on the off set of the wheels you are running.

[Brady]

I don't know if I've ever fitted 33's on this truck but is anything I would be afraid on rubbing the narrow arches. I get this problem with newer 4 runners and thoughs alike all the time. I know its a completely different truck but the same areas would rub. But 33's are defiantly your best bet. If you choose to add wheel/hub spacers make sure its a good quality. This is so critical.

[Austin]

I would say 33x10.50s should fit with no problem other than a little rubbing