3 point harness mount on roll bar?

[Patrolman]

Anyone ever mounted a 3 point shoulder harness seat belt to a roll bar or roll cage? Did you drill through it put a bolt/nut through the hole? Did you weld in a bung? Or maybe you welded on a piece of flat steel and bolted the harness mount on? I have seen all sorts of options, but need to figure out the "best" option. Need to put a shoulder harness in my truck where a roll bar exists. Pics would be great if you have them!

[Brian]

Never done it, but have seen a lot of "through the bar" solutions that work for a bunch of people.

[newracer]

I bought these bungs from Poison Spyder.

http://i218.photobucket.com/albums/cc129/newracer/Cage%20install/IMG_7652.jpg (http://s218.photobucket.com/user/newracer/media/Cage%20install/IMG_7652.jpg.html)

http://i218.photobucket.com/albums/cc129/newracer/Cage%20install/IMG_7654.jpg (http://s218.photobucket.com/user/newracer/media/Cage%20install/IMG_7654.jpg.html)

http://i218.photobucket.com/albums/cc129/newracer/Cage%20install/IMG_7662.jpg (http://s218.photobucket.com/user/newracer/media/Cage%20install/IMG_7662.jpg.html)

http://i218.photobucket.com/albums/cc129/newracer/Cage%20install/IMG_7660.jpg (http://s218.photobucket.com/user/newracer/media/Cage%20install/IMG_7660.jpg.html)

[dieseldoc]

Bungs are the right way to do it.
If you are one that prefers to do things yourself, at least sleave it if your doing a hole through the tube.
Tabs work as well. Yet they need to have some bracing to keep them well anchored.

[Patrolman]

I was looking at those bungs from Poison Spyder. I looked online and couldn't find any great pics of them during the install, only before and after. Those pics help a ton! My only question is what diameter tube you used. I don't think the Poison Spyder site gave a length for them. They obviously have to be long enough to fit the bar that is already installed.

[newracer]

They will work with tube up to 1.75"

[Patrolman]

Thanks! I ordered 1 to start. Will see how the first one works and if I like it, I will likely do the other side and maybe the center.