PDA

View Full Version : Hey Jim....


FINOCJ
October 7th, 2021, 08:57 PM
Thought you'd enjoy...
https://beamingpix.com/images/2021/10/07/PXL_20211007_233815761.jpg
Jim
October 7th, 2021, 09:40 PM
Most enjoyable - what trail?
FINOCJ
October 7th, 2021, 10:01 PM
Gold bar rim...going down the waterfall ledge
Jim
October 7th, 2021, 10:05 PM
Sweet - enjoy the trip!

EDIT:

Might a perm solution be to move the plate up. Drill two mounting holes near the bottom of your swing out and use the plates bottom holes. It does not look like the plate extending above the swing out would cause interference.

Or, just keep sending curious photos...
FINOCJ
October 7th, 2021, 10:33 PM
It blocks the taillight when it higher position.
newracer
October 8th, 2021, 10:17 AM
Mount it with a hinge.
FINOCJ
October 12th, 2021, 10:37 AM
I figure it was well earned...

https://youtu.be/U4YKj-btVes
open_circuit
October 12th, 2021, 10:53 AM
I'm glad I went up that obstacle instead of down it when we were there last year.
Jim
October 12th, 2021, 10:55 AM
Yep! You know you've been wheel'n when the plate's bent.


I'll go back to my - mount the bottom of the plate with the bottom of the swing out - then bend the top to follow the top of the swing out / not block the light. I don't think you'll be blocking any letters on the folded on top section of the plate. The stickers are at the bottom along with the state name. Might all of the needed info fit within the vert surface of the swing out if you did that?

EDIT: Then maybe not - I'm seeing that you have a different plate style than typical Colo.
FINOCJ
October 12th, 2021, 05:44 PM
I'm seeing that you have a different plate style than typical Colo.
standard issue 'collector plate' for old vehicles...emissions exempt, single registration for 5 years etc