PDA

View Full Version : FS: Quadratec QRC Rocker Guards


Steve-O
January 17th, 2022, 02:13 PM
Compatible with 87-06 YJs and TJs. Brand new unused, comes with all hardware and instructions. Sells for $200 new I think, asking $100
FINOCJ
January 17th, 2022, 07:10 PM
Very interested...Let me shoot you a PM....
Steve-O
January 25th, 2022, 07:39 PM
Sold
FINOCJ
February 5th, 2022, 06:18 PM
Thanks Steve....putting them to use!
Jim
February 5th, 2022, 06:21 PM
putting them to use!

My mind is seeing a distortion of the time continuum. Did you purchase a jeep that has a full blown computer in it?
Schmitty
February 5th, 2022, 06:46 PM
Thanks Steve....putting them to use!

That's a very stock-looking Rubi...
FINOCJ
February 5th, 2022, 07:38 PM
Not mine....a friend's. It runs a small OME lift kit with 33s.... winter snow tires in first photos are only 32s.
Jim
February 5th, 2022, 07:44 PM
Nice scene / picture!
Steve-O
February 6th, 2022, 10:06 AM
Those look great James. You had to drill into the frame, right?
FINOCJ
February 6th, 2022, 06:05 PM
Those look great James. You had to drill into the frame, right?

Yup....it uses 4 bolts at the each footing end of the bar/tube that go into the frame, so that is 16 holes drilled into frame. IIRC, they are 5/16". It's not the most heavy duty of mounts as the drilled holes and bolts only thread into the outer side of the rectangular frame tubing. It would be better to drill them all the way through the frame tubing and nut the back side of the bolts, but then you would have to sleeve the holes so the sides of the frame tubing doesn't crush together. We decided the better way to strengthen the mount to the frame would be to weld some short beads around the footing mount to the frame. We didn't do that yet...TBD if it's really needed.