AXLE INFORMATION AND LINKS

[Brody]

I ran into these site while trying to find FJ80 coil swap infor. They are both filled up up a huge amount of axle information for all makes of rigs.

http://forum.neow.net/index.php?showtopic=72810&st=0&start=0

http://nissan4wheelers.com/eve/ubb.x/a/tpc/f/885603133/m/1546019403/p/1/xsl/print_topic

[Brody]

Full Float Axle Conversion Information and Links:

Ford 9" Full Float Information and Links:

Here is a full float Ford 9" conversion article that also shows the flange that was machined to do it:

http://www.bc4x4.com/tech/2002/ff9/

Baer Brakes makes full float conversion kits for quite a few axles:

http://www.pro-touring.com/content.p...om-Baer-Brakes

Schreiner makes full float kits for the Ford 9" also:

http://www.9inchfloater.com/RrEndKit...Kits_28_31.htm

8.8" Full Float Information/Links

Warn used to make an 8.8" full float kit, but no longer do it. Here is some information on that:

http://www.therangerstation.com/tech...oating8_8.html

8.8" full float article:

http://www.code4x4.com/projects/axle_88/axle_88.html

GM 12 Bolt Full Float:

Baer Brakes also makes a full float kit for GM 12 bolts:

http://www.code4x4.com/projects/axle_88/axle_88.html

Dana 44 Full Float Articles and Links:

http://forums.off-road.com/jeep-shor...onversion.html

http://www.4x4wire.com/jeep/tech/axle/xjupgrades/

Dana 41 full float (should be close enough for reference on a 44)

http://www.vernco.com/rearaxle/index.htm

http://forums.off-road.com/jeep-shor...-improved.html

Mitchell Differentials sells a Dana 44 Full Float Kit:

http://www.mitchelldiff.com/

Toyota Axles Full Float:

http://www.4x4wire.com/toyota/reviews/fullfloater/

http://www.off-road.com/trucks-4x4/f...com-11540.html

Man A Fre (Toyota) sells complete Full Float Axle Assemblies:

http://www.man-a-fre.com/feature_items/fullfloater.htm

Inchworm Gear sells Toyota Full Float Kits:

http://www.inchwormgear.com/store/pr...4bab34a7265858

Here are some more links:

Write up on Toyota full float conversion:

http://www.pirate4x4.com/forum/showthread.php?t=636811

Corporate 14 Bolt Disc Brake and Full float:

http://www.pirate4x4.com/forum/showthread.php?t=533375

Hope these links help. This is only some of the stuff for each brand of article I found. There is a huge amount of info out there, including a lot of manufacturers that are making probably 95% of the stuff that you guys are trying to design. In other words, I barely scratched the surface with the links I posted....

Keep in mind that a lot of the ring and pinion guys also deal with their own full float conversion kits and parts for a huge number of axles. It would be worthwhile looking into their products also.

[Brody]

Axle Identification Chart:

This link shows a huge number of popular axles with easy to identify pictures.

http://www.g-body.org/tnt/diffs/diff-housings.php

[Brody]

Dana specific:

http://www.nationwideparts.com/differentials.htm

A little more Dana ++:

http://coloradok5.com/axleguide.shtml

This one might do the trick:

http://thejeep.com/shop/information.php?info_id=7

http://www2.dana.com/expertforms/deabill.aspx

http://www.therangerstation.com/tech_library/Dana44.htm

http://www.truckporn.com/tech/axle-guide.pdf

[Brody]

Thanks to Bent Frame 4x4 and uplandhawaii


AXLE WIDTHS
------JEEP------
'41 to 45 Jeep MB: 48.25"
'46 up CJ-2A, CJ-3A : 48.25"
'49-65 Jeep Utility Wagon: 57"
'49 Willys Jeepster 2WD 57"
'52 up CJ-3B: 48.44"
'52 M-38A 49.19" (Military width)
'54-71 CJ-5 48.44" (so called early-
'55-75 CJ-6 48.44" narrow axle)
'47-65 Pickup (the classic) frnt-56" rr-63.5"
'63-69 J-200, J-2000 65.5"
'63-69 J-300, J-3800 65.75"
'70- 72, Gladiator J-2000 frnt-63.5" rr-63.81"
'70- 72, Gladiator J-4000 frnt-63.8" rr-64.38"
'73 J-2500 frnt-63.5" rr-63.8"
'73 all other J trucks frnt-63.9" rr-64.4"
'74-75 J-10 frnt-62.9" rr-63.8"
'76-87 J-10 frnt-63.3" rr-63.8"
'74-75 J-20 frnt-62.9" rr-64.4"
with disc brakes: frnt-63.0" rr-64.4"
'76-84 J-20 frnt-64.9" rr-65.9"
'63-72 Wagoneer 57"
'73 Wagoneer frnt-57.3" rr-57.5"
'74-75 Wagoneer frnt-59" rr-57.5"
'74-75 Cherokee (full size) frnt-58.8' rr-57.5"
'76-91 Wagoneer, '80+ Cher frnt-59.4" rr-57.8"
'76-79 Cherokee (full size) frnt-59.2" rr-57.8"
'76-78 Cherokee S frnt-59.5" rr-58.5"
'76-80 Cherokee Chief 2 dr. frnt-65.4" rr-62.3"
'81-83 Cherokee Chief 2 dr. frnt-65.3" rr-62.3"
'67-71 Jeepster C-101 50"
'72-73 Commando C-104 frnt-51.5" rr-50"
'72-83 CJ-5, frnt-51.5" rr-50" (so called-
'76-81CJ-7(some '81CJ8's) frnt-51.5" rr-50" narrow axle)
'82-86 CJ-7 frnt-55.8" rr-55" (so called- wide axle )
'81-85 Scrambler, CJ-8 frnt-55.8" rr-55"
'84-87, 93 up Cherokee XJ ?"
'88-92 Cherokee XJ 60 5/8"
'86-92 Comanche, 60 5/8"
'87 up Wrangler, YJ 58"
'93 up Grand Cherokee, ZJ 58"
TJ Rubicon 03 (F) Dana 44 61" (R) Dana 44 60"

------FORD-------
Bronco 77 (F) D44 58"
Bronco 77 (R) Ford 9" 57"
F250 78-79 (F) D60 69.25" (driver drop, king pin, leaf spring sprung: 31.5")
F350 78-79 (F) D60 69.25" (driver drop, king pin, leaf spring sprung: 31.5")
F350 '85-'91.5 (F) D60 69.25" (driver drop, king pin, leaf spring sprung: 36.5")
F350 '92-'99 (F) D60 69.25" (driver drop, balljoint, spring sprung: 36.5")
1/2 Ton '70 (F) D44 65" (high pinion)
1/2 Ton '70 (R) D60 65"

----TOYOTA-----
'79-85 front axle~ 55.5", rear axle~ 55"
'86-95 front IFS~ 59", rear axle~ 58.5"
Tacoma & '96-up 4runner front IFS~ ? rear axle- 60"
T100 front IFS~ 65", rear axle~ 66.75"
Tundra front/rear~ ??
'90-97 Landcruiser FJ-80/FZJ-80 front axle~ 63.5"

-----CUSTOM WIDTH D44s USING COMBOS OF STOCK SHAFTS------
Chevy Dana 44 width possibilities using stock length axle shafts:
(Axle widths are, WMS-WMS - wheel-mounting-surface to wheel-mounting-surface. Perch widths are center to center)

69" wide, 31.5" perches- stock Chevy 8-lug
68.75" wide, 31.5" perches- Chevy axle with Ford 5-lug outers
67.5" wide, 31.5" spring perch centers- stock Chevy 6-lug

65" wide, ~29" perches- long side cut down 2-3/8", use 70's Ford long side axle shaft
64.5" wide, 29" perches- long side cut down 3", use late 70's Wagoneer long side axle shaft
63.5" wide, 27.5" perches- long side cut down 4", use 80's Wagoneer long side axle shaft
62" wide, 29" perches- long side cut 4", short side 1.5", use 80's Wagoneer long side, Dodge short side.

Common Nissan SAS Axle Information (some duplications)

Here's a small list of popular (and not so) axles used for Nissan SAS purposes. So you can compare widthts among brands and against the factroy H233b for example.

(F) = Front
(R) = Rear

Toyota
Mini (Hilux) 79-85 (F) 8" 55" (pass side drop)
Mini (Hilux) 79-85 (R) 8" 55"
Mini (Hilux) 86+ (R) 8" 58"
4Runners 96+ (R) 8" 60"
Tundra/T100 (R) 8.4" 66"
FJ40.45.55 (F) 57" (pass side drop)
FJ40.45.55 (R) 55"
FJ60.62 (F) 60" (pass side drop)
FJ60.62 (R) 58"
FJ80 (F) 64" (pass side drop)
FJ80 (R) 63.5"

Ford
Bronco 77 (F) Dana 44 58"
Bronco 77 (R) Ford 9" 57"
F250 78-79 (F) Dana 60 69.25" (driver side drop, king pin, leaf spring span: 31.5")
F350 78-79 (F) Dana 60 69.25" (driver side drop, king pin, leaf spring span: 31.5")
F350 '85-'91.5 (F) Dana 60 69.25" (driver side drop, king pin, leaf spring span: 36.5")
F350 '92-'99 (F) Dana 60 69.25" (driver side drop, balljoint, spring span: 36.5")
1/2 Ton '70 (F) Dana 44 65" (high pinion)
1/2 Ton '70 (R) Dana 60 65"

Chevy
K30 '79-'87 (F) Dana 60 69.5" (pass. side drop, king pin, leaf spring span: 32")
K30 CC '88-'91 (F) Dana 60 69.5" (pass. side drop, king pin, leaf spring span: 32")

Jeep
Cherokee Chief 81 (F) Dana 44 61"
Grand Wagoneer 89 (F) Dana 44 61.5"
Wagoneer 81 (F) Dana 44 60.5"
CJ-6 74 (F) Dana 30 51.5"
CJ-6 74 (R) Dana 44 50"
CJ-7 83 (F) Dana 30 56"
CJ-7 83 (R) AMC 20 55"
TJ Rubicon 03 (F) Dana 44 61"
TJ Rubicon 03 (R) Dana 44 60"

International
Scout 80 (R) Dana 44 60"

Mercedes
Unimog (F) 404 69" (driver's side drop)
Unimog (R) 404 69" (centered)
Unimog (F) U-1300 82"
Unimog (R) U-1300 82"
Unimog (F) 411 55.5"
Unimog (R) 411 55.5"

Nissan
Hardbody (D21) 86.5-97 (R) H233B 59"
Hardbody (D21) 86.5-90 (R) C200 59"
Frontier (D22) 99-2000 (R) H233B 62.5"

Isuzu
Trooper II 87 (R) Corporate 59"
Rodeo pre-'97 (R) Dana 44 58" (sua)
Rodeo 97-99 (R) Dana 44 60.5" (4-link)
Rodeo 00-03 (R) Dana 44 63" (4-link)

KIA
2000 Sportage (R) 60"

'74-75 Wagoneer frnt-59" rr-57.5"
'74-75 Cherokee (full size) frnt-58.8' rr-57.5"
'76-91 Wagoneer, '80+ Cher frnt-59.4" rr-57.8"
'76-79 Cherokee (full size) frnt-59.2" rr-57.8"
'76-78 Cherokee S frnt-59.5" rr-58.5"
'76-80 Cherokee Chief 2 dr. frnt-65.4" rr-62.3"
'81-83 Cherokee Chief 2 dr. frnt-65.3" rr-62.3"