View Full Version : 7/16-20 all thread?
Speedwagon
November 13th, 2009, 12:34 AM
Where can I get some? I tried the local Ace Hardware's, and they only have 7/16-14. The Brat needs new exhaust manifold studs, and the common fix is to tap for 7/16-20, as the hole is the correct size for it(there's a spacer thing involved, that's not threaded and correct size). Trying to minimize the amount of work I have to do, to make the exhaust seal.
I need enough to make 8 studs, about 3" long each.
4Runninfun
November 13th, 2009, 12:45 AM
Where can I get some? I tried the local Ace Hardware's, and they only have 7/16-14. The Brat needs new exhaust manifold studs, and the common fix is to tap for 7/16-20, as the hole is the correct size for it(there's a spacer thing involved, that's not threaded and correct size). Trying to minimize the amount of work I have to do, to make the exhaust seal.
I need enough to make 8 studs, about 3" long each.
try reading this thread might be some help...
LINKY (http://www.frontrange4x4.com/forums/showthread.php?p=28648)
Brody
November 13th, 2009, 05:37 AM
AA Hardware on S. Broadway and Tufts on the east side of the road. If that doesn't work, You have A&I Nut and Bolt on Kalamath around 1st or second south of 6th Ave and Fasteners Plus. There is also a specialty fasteners place down by Mississippi west of Santa Fe in that industrial area, but I can't remember the name..
Metalhed
November 13th, 2009, 11:42 AM
Why tap for Standard. Go to AAA metric
http://www.aaametric.com/
These guys rock. Super folks to work with. one stop shoping for metric stuff
Funrover
November 13th, 2009, 02:37 PM
Fastenal ROCKS!
Speedwagon
November 13th, 2009, 02:39 PM
Why tap for Standard. Go to AAA metric
http://www.aaametric.com/
These guys rock. Super folks to work with. one stop shoping for metric stuff
Because I don't have to drill anything, it's already the right size.
Front Range 4x4 forums are powered by vBulletin™ Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.