Front Range 4x4 Upcoming Trail Runs - Add a New Trail Run

Results 1 to 7 of 7

Thread: Gear ratio for 35's on a 2015 JKU Rubicon 4 door

  1. #1
    Join Date
    Aug 2015
    Member
    #1758
    Last Online
    4 Weeks Ago
    Location
    Longmont
    Age
    61
    4x4
    2015 Jeep Wrangler Rubicon
    Posts
    112
    User Name
    coleman07
    Real Name
    Sean
    Thanks Given
    22
    Thanked 16 Times in 15 Posts

    Default Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    I lifted my Jeep 4.5 inches and put 35's on it. I noticed that I don't get the engine braking I got with a stock vehicle, needing to use the brake on steeper declines.
    Right now I am very hesitant to do a trail like Red Cone where I would need to brake instead of letting the engine get me down. On the other hand, I don't want to burn
    up the engine on the interstate getting to the trail. I only use the Jeep to go off-road or get to the trail.

    Using this website, https://go4x4it.com/wrangler-jk-rpm-calculator, I see that going to a 4.88 gear vs the 4.10 I have is an increase of 435 RPM at 70 MPH. Looking at this chart,



    it appears that 4.88 is the right gear ratio but I want to be sure an increase of 480 RPM is ok at 70 MPH. Will the 4.88 offer the engine braking I desired when I was running a stock JK?

    Thanks so much,

    Sean

  2. #2
    Join Date
    Jun 2011
    Member
    #867
    Last Online
    10 Hours Ago
    Location
    Englewood
    4x4
    Jeep Wrangler JLU
    Posts
    3,606
    User Name
    xaza
    Real Name
    Cliff
    Thanks Given
    177
    Thanked 612 Times in 461 Posts

    Default Re: Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    How are you coming up with an increase of 480 rpm? going 4.88 is an increase of 440 rpm versus the 4.1 on the 35" tire but what you want to do is maintain close to factory ratio. 4.1 gear on stock 32" tire was 2502 so only about 221 rpm increase which is quite minimal and honestly better because you have to account for the increased unsprung weight. I don't have a JK so I can't give personal experience but I would think 4.88 with 35" is good. It was perfect combo for my XJ.
    ___________
    We do not remember days, we remember moments.

    Cesare Pavese

  3. The Following Member Says Thanks to xaza For This Post:

    coleman07 (April 14th, 2023)

  4. #3
    Join Date
    Aug 2015
    Member
    #1758
    Last Online
    4 Weeks Ago
    Location
    Longmont
    Age
    61
    4x4
    2015 Jeep Wrangler Rubicon
    Posts
    112
    User Name
    coleman07
    Real Name
    Sean
    Thanks Given
    22
    Thanked 16 Times in 15 Posts

    Default Re: Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    Thank you for the recommendation. Sounds like I know what I need. I was using this calculator on the Go4x4it site. With 4.10 and 35 in tire, they said the RPM at 70 MPH was 2288 and at 4.88, it was 2723 which is 435 RPM.

  5. #4
    Join Date
    May 2017
    Member
    #1998
    Last Online
    October 22nd, 2024
    Location
    Colorado Front Range
    4x4
    JKUR
    Posts
    849
    User Name
    Getaklu
    Real Name
    Chris
    Thanks Given
    178
    Thanked 341 Times in 226 Posts

    Default Re: Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    I run 5.13's with 315's (short 35's) and don't have a problem on the highway. Crawls well and lots of engine breaking. I was thinking that 4.88 was basically a wash with the bigger tire from the OE 4.10/tire combo when I was researching. I wanted to be a bit lower as I didn't like the OE ratio in 1st or reverse so went with the 5.13. IIRC, right around 3000 rpm at 75.

  6. The Following 2 Members Say Thanks to Getaklu For This Post:

    coleman07 (April 14th, 2023),Jim (April 14th, 2023)

  7. #5
    Join Date
    Aug 2015
    Member
    #1758
    Last Online
    4 Weeks Ago
    Location
    Longmont
    Age
    61
    4x4
    2015 Jeep Wrangler Rubicon
    Posts
    112
    User Name
    coleman07
    Real Name
    Sean
    Thanks Given
    22
    Thanked 16 Times in 15 Posts

    Default Re: Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    Thanks for that info. i will look at 5.13 also!!

  8. #6
    Join Date
    May 2011
    Member
    #845
    Last Online
    November 1st, 2024
    Location
    Denver
    4x4
    Jeep Wrangler Rubicon Unlimited
    Posts
    1,554
    User Name
    Max
    Real Name
    Max
    Thanks Given
    61
    Thanked 241 Times in 177 Posts

    Default Re: Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    I have 4.88 on my 37's and am happy.

  9. #7
    Join Date
    May 2017
    Member
    #1992
    Last Online
    April 16th, 2024
    Location
    Thornton
    4x4
    '20 Jeep Wrangler Rubicon Recon
    Posts
    74
    User Name
    TNTJ05
    Real Name
    Erik & Maria
    Thanks Given
    34
    Thanked 37 Times in 16 Posts

    Default Re: Gear ratio for 35's on a 2015 JKU Rubicon 4 door



    Did 4.56 on my 2door rubi JK on 35's, and 4.88 in a 4dr rubi JK on 37's. Both were great for street and trail with the 4:1 T-case.

Similar Threads

  1. FS: 2009 Jeep Wrangler JK Rubicon Unlimited 4 Door - LOW MILES!
    By Max in forum For Sale, Wanted, Trade, Free
    Replies: 11
    Last Post: January 22nd, 2017, 09:10 PM
  2. FS: 2004 Jeep Wrangler Rubicon plus gear - $17000 Denver/Lakewood
    By Jim in forum For Sale, Wanted, Trade, Free
    Replies: 1
    Last Post: July 19th, 2016, 08:27 PM
  3. to high of gear ratio
    By dscowell in forum General 4x4 Tech Topics
    Replies: 19
    Last Post: August 12th, 2013, 05:03 PM
  4. What is crawl ratio
    By dscowell in forum General 4x4 Tech Topics
    Replies: 32
    Last Post: April 18th, 2013, 09:32 PM
  5. Gear/tire/crawl ratio calculators
    By Brody in forum Tech How To
    Replies: 0
    Last Post: March 30th, 2009, 08:06 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
BACK TO TOP